RUBBER ACCESSORIES WAKEFIELD (F1B) PROP UNITS & ACCESSORIES
The prop units are now out of production. However I do have a quantity of spare parts still available as follows: Nose ring £2.00; shaft £1.90; stop pin and clip £1.30; Montreal pin and clip £1.30; rear hook £1.90; front nut £1.25; roots 90p per pair; Flexible spinners red, black, white, yellow and green, 49p; Springs set of 2, 30p; set of bearings £4.00. There are some part finished units left that with some work could be finished £15.00 for a set of parts. Adjustable pitch hubs for use separately or with prop hub, £4.50 per pair. All item plus postage.
JOURNAL RACES
Journal races for F1B prop units or similar use. 3/8" OD for 1/8" shaft, 5/32" deep with flanges deep grooved. £4.00 for a pair of bearings, plus post.
CHINESE WAKEFIELD (F1B) PROP UNITS
Fully machined from aluminium. Montreal stop, front of the unit pulls forward for release. Snap on plastic spinner, nose ring, 30 mm outside diameter. Weight 30 gms. roots are a hollow cuff to take prop blades. Rubber attached to integral bobbin. £22.00 plus post. Image
FREE FLIGHT NEWS (FFN) (F1B) PROP UNITS
All units now sold. However There are a few spare parts left in stock, ask for details and prices.
F1G PROP UNIT, MOTOR TUBE, BOOM & COUPLER COMPLETE (BUKIN)
Prop unit and nose ring - Very neat ultra light with spinner and ball race mounted shaft, complete with nose ring, clip on rubber holder and prop hangers. £50.00. Spare nose rings £5.00, bobbins £4.50, Prop hangers £3.00. Prop blades available at £20.00. All item plus postage. Image Image
Motor tube - 2 layers of 93 gm Kevlar cloth, hot cured epoxy matrix - 400 mm x 20.5 mm to 18.5 mm dia, weight 7 gms, plus post.
Boom - 12 mm to 5 mm x 740, 5.0 gms - £15.00 plus post.
Connector - two piece alloy coupler for motor tube/boom.- £15.00 plus post.
Complete F1G fuselage - with prop unit and blades £110.00, without blades £90.00. motor tube, boom and connector only £44.00 plus post.
The fuselage can be used as an upgrade for the the Prima kit
F1B MOTOR TUBE, BOOM & COUPLER COMPLETE (BUKIN,VIVCHAR)
Motor tube - 3 layers of 93 gm Kevlar cloth, hot cured epoxy matrix - 520 mm x 29.0 mm to 26.0 mm dia, weight 22 gms, £18 plus post.
Boom - 12 mm to 5 mm x 740, 7.8 gms - £15.00 plus post.
Connector - two piece alloy coupler for motor tube/boom.- £15.00 plus post.
Complete F1B fuselage - £46.00 plus post.
This fuselage can be used as an upgrade for the Prima kit
The complete fuselages are dispatched in plastic tubes. The return of these tubes, were practical, for recycling would be appreciated.
'STAMOV' WING JOINERS
Full details see glider accessories page.
F1B 3.0 mm x 120 mm £6.00 each plus post.
REAR MOTOR PEGS
Hollow alloy pegs 3/16" OD with screw end, two sizes to fit 28 mm and 30 mm dia. fuselage will take 12 swg stooge pin "neat" and "secure" £1.90 each, plus post.
Heavy duty version of the above 1/4" OD with screw end, two sizes to fit 28 mm and 30 mm dia. fuselage 10 swg stooge pin £2.10 plus post.
RUBBER STOOGE
The important parts for a simple stooge 3" (wide) x 2" (deep) alloy channel with tubular base to fix to detachable bayonet fixing (pole not supplied). Full customisation details included. £11.50 plus post.
THRUST RACES
3 sizes : - 14 SWG (2 mm), 16 SWG and 3/32" brass housing with steel balls £3.00 plus post.
THRUST WASHERS (PRESSED STEEL)
2 sizes : - 16 and 18 SWG, 65p each, plus post.
BRASS BUSHES
14, 16, 18 SWG - 85p each, plus 44p post .
One piece aluminium, very thin wall, very light, 85p each, plus post . no seams 4 sizes:
1) hole size 1/4", 7/8" dia. 1/4" wide
2) hole size 5/32", 3/4" dia. 1/4" wide
3) hole size 5/32", 3/4" dia. 3/8" wide
4) hole size 1/4", 3/4" dia. 3/8" wide
Delrin, very light all sizes plus post.
1) hole size 1/8", 12mm dia 1/8" wide 50p each
2) hole size 1/8", 15mm dia 1/8" wide 60p each
3) hole size 3/16", 18mm dia 3/16" wide 70p each
4) hole size 3/16", 20mm dia 3/16" wide 80p each
5) hole size 1/4", 20mm dia 1/4" wide 80p each
6) hole size 1/4", 25mm dia 1/4" wide 90p each
Use with alloy tube or pultruded carbon fibre tube see rear motor peg material below.
FREE FLIGHT NEWS (FFN) RUBBER BOBBINS
One piece aluminium, thin wall tube with ends machined to clip into a winding tube. OD 1/4" x 1" long will take 5/32" motor peg. 10p each plus post.
REAR MOTOR PEG MATERIAL
HE30TF alloy tube 22 swg wall thickness.
3/16" OD - 50p per foot, plus post.
1/4" OD - 50p per foot, plus post.
5/16" OD - 55p per foot, plus post.
The tubes can be fitted together to make rear motor peg assemblies for rubber models or use in with bobbins.
Pultruded carbon fibre tube
0.125" (3.18mm) OD x 0.070" (1.78mm) ID x 36" (915mm) - £3.00 plus post.
0.196" (4.98mm) OD x 0.120" (3.00mm) ID x 36" (915mm) - £3.00 plus post.
PROP LOOPS (TIM GRAY PATTERN)
14 SWG heavy duty (open and F1B ) 40p, plus post. Hard plastic tube for sheathing 90 p per metre plus post.
16 SWG standard (open and F1B), small (Cd'h), 35p each all sizes, plus post. Hard plastic tube for sheathing 80 p per metre plus post.
CZECHOSLOVAKIAN IGRA RUBBER MODEL PROPELLERS
240 mm & 200 mm £1.25 each. 150 mm 75p. Very thin light blades that can be trimmed to the desired shape. The 240mm prop is the P-30 propeller of choice! All plus post.
SPENCER WILLIS
Spare propunits for Spencer's P20 and P30. 8" P20 £3.00 and 10" P30 £3.00 both plus post.
BMFA EDUCATION PROGRAMME
SPARE PROPELLER UNITS - Complete - fits all BMFA models, red 5.5" or black 6" either propeller. 40p plus post. See kits page For details of the models
KP AERO MODELS PRODUCTS
ADJUSTABLE NOSE BUTTON Plastic nose button for simple thrust line adjustment. Double pack £3.00 plus post. Image
SIMPLE NOSE BUTTON. Large or small. Pack of 10 either size £1.00 plus post.
INDOOR RUBBER WINDER 5:1, 10:1 and 15:1 ratio winders (specify preference) - £7.95 each, plus post. Image See details of counter below.
INDOOR RUBBER WINDER COUNTER A small electronic counter produced by Tony Elliott that is easily fitted K&P winder and is programmable to all of the 3 ratios. Complete kit £5.00 plus post. Image Image Image
LIGHTWEIGHT PLASTIC WHEELS 22 mm (7/8") dia £0.95 per pair 25 mm (1") dia £0.95 per pair 32 mm (1 1/4") dia £1.20 per pair 10mm (3/8") dia pack of 10 £1.05. All sizes plus post.
10-4 WINDER 10:1 & 4:1 combined winder for outdoor models. Made from nylon reinforced plastic, ball races support the moving parts, spade handle and spring loaded motor attachment, weight 305 grams Now supplied complete with an analog counter £70.00 plus post. Image Image Image
For further detail see KP Aero site
Alloy "stuffing sticks" for rubber motors 57cm long £10.00 plus post
GIZMOGEEZER PRODUCTS
For the full range of GizmoGeezer rubber model precision products see the GizmoGeezer page.
OTHER ITEMS
In addition check the generic pages for materials, components, timers, plans, kits and equipment etc.
See Publications - "Rubber Model Propellers", for help in using the items.
All prices plus postage and packing see Post and Packing
TOP OF PAGE
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}