KITS PEL-AERO KITS (PETER LLOYD AUSTRALIA)
PERFORMANCE MODELS WITH THE WINNING EDGE
Note that the range of kits has recently been updated
HIGH FLYER - Span 16" (40 cm), Length 16.3" (41.5 cm) - A no nonsense beginners model that requires the minimum of tools to complete. Preshaped components made from carefully Selected Contest Grade Balsa added to a minimum of supervision can create in 4 hours a fun flyer with contest capabilities. Suitable for school recreation activities or club fun days - £5.00 plus post. Image
WAMIRA 18 ver 3.1 (YOUNG EAGLE) - Span 18" (45 cm), Length 19.4" (49 cm) - Based on the former Australian record holders' model, this design (now with a carbon reinforced fuselage) allows the beginner to expand their building skills or for the experienced modeller a budget price contest model. It takes longer to build but the results are worth it. - £8.00 plus post. Image
EPSILON 21 ver 3.0 - Span 21" (53 cm), Length 21.6" (54.8 cm) A "No holds barred" competition model designed for those finicky conditions when size matters! A fashionable 6 piece wing featuring built in wash-in for snappy launch recovery is added to a carbon/balsa composite fuselage and to bring your master piece back safely; full details to construct the "Broken Back" D/T system are provided. A perfect compliment to the Wamira. Not a beginner's kit. - £19.00 plus post. Image
KATAMAX 3.0- Span 18" (45 cm), Length 19.3" (49 cm). Created for the growing interest in catapult launched gliders, this kit has evolved to feature a "Pop-up" wing dethermaliser and introduces a carbon reinforced fuselage. This model allows you to discover the thrill of flying a hand launched glider without physical discomfort. As a potential contest winner, this design offers the best of two worlds. Not a beginner's kit. - £12.00 plus post. Image
POT SHOT- Span 16" (40.6 cm), length 18.8" (47.8cm). POTSHOT is a unique model, designed not only for the fast growing outdoor catapult launched glider scene, but for the use of carbon fibre as an integral part of its construction and a "Tip-up" wing D/T (the only kit available to offer these features). Reviewed in the June 2003 issue of MODEL FLYER and recommended for fun flying or competition you can become a "Hotshot" with a POTSHOT. Not a beginners kit. - £12.00 plus post. Image
ZEPHYR - Span 18.0" (45 cm), Length 15.75" (40 cm). Welcome to the fascinating world of Jetex/Jet-x powered Model Aircraft. These simple reusable solid fuel motors coupled with the ZEPHYR offers the avid sport flyer an exciting low cost introduction to rocket powered flight with the added bonus that the ZEPHYR can be built as a Catapult Launched Glider Created for those who prefer a more simplistic approach. This "Flitzer" all sheet style model is for 50 size motors - £10.00 plus post. Image Image Image Rapier conversion details Image Image Image Image Image For details of availability see RAPIERS & JETEX .
ADDITIONAL ITEM. The carbon strips included in the kits are available separately.
POT SHOT - 12” (305 mm) long 0.25” (6 mm) taper to 0.08” (2 mm) 0.007” (0.18 mm) thick, £2.00 per pair plus post.
KATAMAX - 18” (457 mm) long 0.75” (19 mm) taper to 0.20” (5 mm) 0.007” (0.18 mm) thick, £2.50 per pair plus post
FURTHER INFORMATION re PEL-AERO
Development continues, follow this link for detail Pel-Aero ideas
Remember the quality wood used in these kits is also available see the Wood page
Follow this link through to the Pel-Aero site for more details of the products.
See the product review page for further information with respect to the EPSILON 21, ZEPHYR & POT SHOT kits. Comments in the product reviews have been taken account of in the update of the range.
Remember that additional items such as timers needed in the construction of these models are available from Free flight Supplies.
STING AERO PRODUCTS (LEN SURTEES)
Butterfly 20 designed by Mick Page. Complete for the most famous chuckie in the UK. - £20.00 plus post.
See the product review page for further information on the Butterfly 20
FLY IN (INDOOR SPORT RUBBER MODEL KITS FROM AUSTRALIA)
HANGER RAT - Original design by H. Barr. High wing "V" dihedral model complete with rubber tissue and hardware, a good reliable indoor fun flyer - £6.45 plus post.
ZEPHYR - From a plan by Randy and Irene Wrisley and modified by Laurie Kelsall. A canard design complete with rubber tissue and hardware - £5.95 plus post.
See the product review page for further information
DART - simple rubber powered aircraft - Span 12' (30 cm) - £1.80 plus post.
GYMINNIE CRICKET - rubber powered model - Span 15" (38 cm) - £2.00 plus post. In 2008 the Indoor technical committe of the BMFA is running a challenge using the Gyminnie cricket for further details see cricket this link includes PDF downloads on how to improve the Cricket.
FROG - Span 20" (51 cm) - model fitted with undercarriage from which it will take off - £3.00 plus post.
SPARE PROPELLER UNITS - Complete - fits all BMFA models, red 5.5" or black 6" either propeller. 40p plus post.
PRIMA F1B The kit is complete with all the parts that are needed (covering and glue excluded) to build this excellent introduction model for F1B class. This design is a simplified version of the model the Igor has flown with great effect for a number of years.
On receipt of an S.A.E. I will send copies A4 sized 3 views of the above before you commit to a purchase. Image Image Image Image
Complete kit all materials and instructions £120.00 plus post. Full size plan £5.00 plus post.
Fuselage upgrade components are described in detail in the rubber accessories page here
PRIMA 2001, 2002, 2003, 2004, 2005 PRIMA CONTESTS
Look at the PRIMA page for the report and photos of the 2001, 2002 and 2003 event.
If you want further details of the events contact me here.
SWEET "P20" P20 rubber model. Laser cut balsa and ply parts, tubular balsa fuselage ready to finish, 2 rubber motors. £23.00 plus post. Image Image Image
SWEET "P30" P30 rubber model. Laser cut balsa and ply parts, tubular balsa fuselage ready to finish, 2 rubber motors. Complements the SWEET "P20" £32.50 plus post. Build this model and include a Gizmo Image
P.SUPA “P30” P30 contest rubber model. Laser cut balsa and ply parts, tubular balsa fuselage ready to finish, 2 rubber motors. £35.00 plus post. ImageSpare prop units for Spencer's P20 and P30. 8" P20 £3.00 and 10" P30 £3.50 both plus post. Also available hand carved SENATOR props £19.00 plus postage.
KORDA 1939 winner. (Bob Jones plan) Laser cut complete kit, plan all parts, tissue, metal parts and other materials supplied £49.00 plus post. Image
BLACKPOOL ROCK (Bob Jones plan) Laser cut complete kit, plan all parts, tissue. metal parts and other materials supplied £29.00 plus post. Image
BLUEBOTTLE SQUADRON
A new range of high quality kits. Strip wood and laser cut sheet parts, tissue, moulded canopies, pilot and other parts, propeller, hardware and transfers etc etc. Excellent value
REGGIANE RE-2000 Italian WWII fighter 1/24scale 18" wingspan £27.50 plus post Image
BELL X-1E 1950's experimental supersonic rocket ship 1/24 scale 11" wingspan £21.95 plus post Image
WING-DING Inspired by the famous Wilmot Mansour jetex powered flying wing from the 1950's, but reduced to 20" wingspan and powered by a rapier L1 motor. £15.50 plus post Image
FOCKE-WULF 190D The initial prototype was sucessfully flown powered by electric power -Atomic Workshops Voodoo 25 motor and Zombie flight profiler. The pre production build was built as the rubber powered version and was flown at the 2008 FAC Nationals at Geneseo where it gained 2nd place in static and turned in repeated flights of approx 40 seconds. 1/24 scale 18" span £29.25 plus post Image
A link to a video clip of one of the flights at Geneseo is attached (courtesy of Mike Stuart)
http://www.ffscale.co.uk/movies/g08/g08_fw190a.wmv
HAWKER TYPHOON. The superlative British WWII ground attack aircraft 1/16 scale 32” wingspan. This kit includes just about everything. Plans and instruction booklet for 2 versions. Laset cut sheet parts, hardware, moulded plastic parts, transfers, propeller and rubber. Can readily be converted to R/C electric, details included. £58.48 plus postage
CUSTOM KITS
I am regularly asked what items do I need from the list to make a particular type of wing, fuselage or complete model. Please let me know your needs and I will see what I can suggest. We can discuss these needs and I can produce a customised package of parts. I have put together a package of items for F1B flying surfaces see custom kits
LASER KTS
The laser cutting of parts in small volumes and to a high quality has now become a practical proposition. Leon Cole of BELAIR is now producing a range of kits that include a number of free flight models. See Laser kits for more details.
Leon has kitted a number of models from plans in the Free Flight Supplies catalogue. Details of plans below, kits available from Leon. Others are in the pipeline.
All prices plus postage and packing see Post and Packing
TOP OF PAGE
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}