This newsletter replaces No.72 on the web site. The list is being developed and the gaps are being filled in. Some new product ideas are being developed (slowly!), but it all takes time. The tidying and sorting of the range continues. My idea now is still to deepen the range rather than expand into new areas. I will also take any opportunities that come my way to improve the range of items.
5th September 2015
HARD COPY PRICE LIST & CATALOGUE
List number 88 September 2015
See the Hard Copy Price List & Catalogue to down load a copy
Changes have been made to credit card payments. On receipt of an e-mail order I will send a invoice that can be paid by direct link. This will strengthen security of payments.
These timers and the idea was passed to me by Ralph Sparrow. These plastic dampers can be used in home constructed timers. Very light (1.2 grams) Ralph's full conversion details supplied £4.00each.
Now available a fully converted timer ready to go £8.50 each
MICRO SAW BLADES
Saw blades that clip into the No. 3 scalpel handle. Very fine blades which are ideal for the precision cutting of plastics, wood, kit part detail and precise hole cutting.
MT011 Standard pack of 8 blades £8.00
MT012 Thin blades pack of 6 blades £6.00
5A HONEY 32’ span rubber powered sport model £5.00
6A FIFI a modern F1G 51” span £5.00
7A LITTLE HINNEY A very good Standard 50” span F1H £5.00
8A THE ROCKET 1938 Wakefield 43” span £5.00
9A THE VICTRACE 1939 Wakefield 44” span £5.00
10A THE JAGUAR 1946 Wakefield, the winner in 1948 45” span £5.00
11A PJERRI 75 “V” Dihedral 42” span A1 £5.00
12A REARWIND SPEEDSTER 1940 scale rubber 35” span £5.00
13A THE ARISTOCRAT Wakefield 44” span £5.00
14A 1946 CONTEST GLIDER 60’ span £5.00
604 TEAL Hi-Thrust line 0.8cc power model 37” Span (2sheets) £5.00
605 MARAUDER A/2 65” span (2 sheets) £5.00
There are various ideas in the pipeline that are being developed: -
The state of play the progress (if any!) is noted! Very little in fact has happened the effort of keeping the ship as it exists on the road takes all the time that is available.
New Polish timers have been specified and prototypes are awaited. My producer is getting down to the new ideas and more prototypes are due very soon. Currently he has problems keeping up with demands for the existing range. A new design for a three function flat scroll timer is being developed. A new lighter weight Tomy timer is also being tested. Now I have the combined engine squeeze off and D/T I'm also looking at a valve shut off operating on the same basis
More data charts. When I get around to writing them up.
The How To Do It Publications other ideas based upon my experiences and your questions are being written up.
I'm continuing to concentrate on getting the pipeline sorted and rationalisation rather than searching out new items unless the obvious appears! However as you will see from the above the list just keeps growing!
SALES AT FORTHCOMING CONTEST / EVENTS & OTHER ACTIVITIES
The on-going state of Local Activity can be viewed